|
|
M3 Socket Cap Buttonhead Screws, 25mm longBolt Depot
|
x 1 | |
|
|
M3 x 3mm Short Heat Set InsertsAdafruit
|
x 1 | |
|
|
Rubber Feet, 7.9mm DDigikey
|
x 1 |
|
KiCad 8.0KiCad
|
White Rabbit V1.0.0
The White-Rabbit is a 16 channel-output time synchronization device for producing Harp Protocol timestamps per the Harp Protocol spec. All devices plugged into this device will receive an identical timestamp, from which they can use to synchronize to this device.
This device can form the basis of a synchronized Harp-based system with up to 16 separate Harp devices.
White Rabbit V1.0.0
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
CERN-OHL-P-2.0 License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Sonya Vasquez
-
White Rabbit V1.0.0
The White-Rabbit is a 16 channel-output time synchronization device for producing Harp Protocol time...
-
harp.device.lickety-split.main-board v1.0.0
This is the main board for the Lickety-Split lick detection system. Lickety Split is a high-speed, e...
-
harp.device.lickety-split.cable-buffer v1.0.0
This is the conductive sensing element that makes an electrical connection to the water-dispensing l...
-
LightObject Mirror Reverse Adapter
This adapter is designed to reverse the orientation of the mirror in the LightObject mirror mount fo...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1335 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1865 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1852 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2030 0 1 -
