|
OnShapeOnShape
|
LightObject Mirror Reverse Adapter
This adapter is designed to reverse the orientation of the mirror in the LightObject mirror mount for CO2 laser cutters. Doing so flips the knobs to the other side of the part, enabling you to design a more compact laser enclosure.
This adapter preserves both the M27 x 0.75 internal thread to install the original retainer ring that came with the part and the M36 x 0.75 external thread used to screw into the kinematic base.
- Light Object 25mm Mirror Mount
- Original Onshape design file
LightObject Mirror Reverse Adapter
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
CERN-OHL-P-2.0 License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Sonya Vasquez
-
White Rabbit V1.0.0
The White-Rabbit is a 16 channel-output time synchronization device for producing Harp Protocol time...
-
harp.device.lickety-split.main-board v1.0.0
This is the main board for the Lickety-Split lick detection system. Lickety Split is a high-speed, e...
-
harp.device.lickety-split.cable-buffer v1.0.0
This is the conductive sensing element that makes an electrical connection to the water-dispensing l...
-
LightObject Mirror Reverse Adapter
This adapter is designed to reverse the orientation of the mirror in the LightObject mirror mount fo...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1331 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1858 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1845 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2020 0 1 -
