|
|
FTD240XS |
x 1 |
USB controled 1 of 16 relays
This is and update to a 1 of 16 MUX. I switched to relays so I can connect it to DVM and measure Ohms, not just voltage.
Using Omron G6DN-1A DC5 (NOT L)
All in a Hammond 1455N1201 box that will need a little trim.
This is a board I designed to operate off the USB 5 Volts. The relays are low current 22mA 3.5 picking voltage.
To control the relays you will need the FTDI API form FTDI.
USB controled 1 of 16 relays
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(1)
More by i_bell
-
USB OP-AMP Buffer Driver
USB FTDI 240XS 8 BIT I/O, connected to 4 dual op amps as level shifters. TLV2372 Dual OP-amp 3-MHz ...
-
USB controled 1 of 16 relays
This is and update to a 1 of 16 MUX. I switched to relays so I can connect it to DVM and measure Ohm...
-
1 of 4 RF switch USB Controlled
I am hoping this works out, it is my first attempt with PCB way with a non-FR4 board material. Stirp...
-
1 of 16 USB controled Mux for O'Sope or Meter
### DESCRIPTION1 of 16 MUX for oscilloscope, with a 10X probe on the PCB. The Layout can support a T...
-
2 Line, Quad, 1 inch, 7 segment Displays
### DESCRIPTION2 Line, shift out, 4 digit, 1 inch 7 segment displays.### TECHNICAL DETAILS / COMPONE...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1429 0 5 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1955 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1969 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2141 0 1 -
