Ond?ej Kuběna
CZECH REPUBLIC, THE ? + Follow
Tools, APP Software Used etc.
|
fusion360 |
Description
Solder Paste/Flux Syringe Cap
When solder paste or flux is left uncovered, it can dry out, harden, or become less effective. With this custom-fit cap, the syringe nozzle is tightly sealed, preventing air exposure and keeping the contents usable for much longer.
Features:
- Reusable – simply wash and reattach when needed.
- Tight seal – reduces drying of flux or solder paste.
- Fits standard syringes – compatible with common electronics paste and flux tubes.
- Print it ouf PETG if possible.
- Practical workshop accessory – saves money by reducing wasted materials.
Why do I use it?
Flux and solder paste are essential for good soldering, but they’re also expensive and sensitive to air exposure.
Schematic and Layout
If you got any questions, you can ask here. Also you can download files from the github.
https://github.com/Ondrak-123/All-Files-From-PCBWay
CAD-Custom parts and enclosures
STL for the cap
Terrific Wolt-Albar (1).stl
Sep 05,2025
490 views
Solder Paste/Flux Syringe Cap
This is a syringe cap so your flux or a solder paste for longer storage. (The flux thanks to the cap doesn´t dry out so easily).
490
1
0
Published: Sep 05,2025
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Copyright Info
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Ond?ej Kuběna
-
Choose the right brightness for your LEDs. LED RESISTANCE HELPER Tool
This board features 6 different resistance values so you can find the right brightness for your proj...
-
EON Keychain
EON Keychain, can be multicolor.No special settings or supports needed.Filament: PLANo rafts and no ...
-
EON - Figure
EON - Figure, can be multicolor.Supports needed, organic support setting is best, you can use the au...
-
EON - Articulated fidget toy
EON-Articulated Fidget Toy, can be multicolor.No special setting or supports needed.Filament: PLANo ...
-
Led Chaser, Mostly SMD, using NE555 & CD4017
NE555 & CD4017 LED CHASER-The LEDS, RESISTORS AND INTEGRATED CIRCUITS are all SMD, therefore the...
-
Arduino Heartbeat Monitor with HW-487 Pulse Sensor and 16×2 I²C LCD
This project is an Arduino Uno–based heartbeat monitor that uses the HW-487 pulse sensor to measure ...
-
Astable Multivibrator Using Transistors
This project is an Astable Multivibrator built with two BC546 NPN transistors, along with resistors ...
-
ZERO PCB 6*7cm - Perfboard
Please do not use BOM and the centroid file because they are irrevelant and not needed. (In the BOM ...
-
NCV Tester, Detect LIVE electronics
Warning / Safety Notice:This tester is for basic DIY and educational use only.It is not a profession...
-
ON/OFF Flip Flop Switch Using NE555
This project is an ON/OFF flip flop switch circuit built around the popular NE555 timer IC. It acts ...
-
Solder Paste/Flux Syringe Cap
When solder paste or flux is left uncovered, it can dry out, harden, or become less effective. With ...
-
LED Tester
This project is a simple LED tester, designed to quickly check LEDs of different colors, sizes, and ...
-
M3-M10 WASHERS
Overview:M3-M10 3D printed washers fit bolts or screws sized M3 to M10. They can be printed in a var...
-
M3-M10 NUTS
Overview: M3-M10 3D printed nuts are customizable fasteners that fit bolts or screws sized M3 to M10...
-
WICK, Solder Wire, Tin spool holder
This project is a 3D printed coil holder designed for organizing wires, soldering tin, and other spo...
-
Power Supply for Audio Amplifier
INPUT 16-18VACOUTPUT1 12VDCOUTPUT2 24VDC?This project is a dedicated power supply unit designed for ...
-
Fume Extractor with 3D Printed Case, Carbon Filter and 70mm (or any) Fan
This project is a DIY fume extractor designed to keep your soldering area safe and clean.Features:3D...
-
Arduino UNO R3 Back Cover
Protect and organize your Arduino Uno R3 with this precision-designed back cover. It shields the boa...
You may also like
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1393 0 5 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1926 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1929 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2108 0 1 -
