|
KiCad 8.0KiCad
|
Simple Amiga 600 ROM relocator and switcher
This is a rom switcher I used in conjunction with CPU adaptor for 68010, it relocates the ROM to allow the CPU Adaptor to fit and the keyboard to fit correctly.
Requires used 27C800 or 27C160 ROM - No longer produced
NOTE
- Solder the ROM direct (it will not fit with a socket installed)
- Use right angled 2x3 connector soldered to the underside
See video for notes on construction and installation, also very similar to my other ROM switchers.
(PCBWay Sponsored Video)
https://youtu.be/ePdNxuf__D8
Simple Amiga 600 ROM relocator and switcher
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Andi Hack Build Restore
-
"JazzTick" Amiga Tick Signal Generator
This project is designed to be simple and inexpensive to build, while being relatively easy to adapt...
-
"IOAMIGA" Amiga to Iomega ZIP 100
Based on PPAZIP By Bruce Abbott, originally developed in 1998, this is a buffered version of the int...
-
TF536 Flatmate
A simple adaptor that allows the a DoM to be connected to a TF536 44pin IDE Header and lay flat abov...
-
IBM AT/XT Power Switch Cover/Cowl
This replacement should fit most AT power supplies that copied the original IBM XT / AT Design, but ...
-
Simple Amiga 600 ROM relocator and switcher
This is a rom switcher I used in conjunction with CPU adaptor for 68010, it relocates the ROM to all...
-
Amiga 600 DIP 64 CPU Adaptor - I'll be DIPped
Simple 2 layer PCB to allow a DIP 64 Processor to be fitted to an Amiga 600 (can be created for $5)W...
-
Amiga ROM Switcher with Program(Write) Mode and Jumper for Early Revision Fix
Universal 27C400 ROM switcher designed for use with 68k OCS/ECS Amiga (A1000,A500,A2000,A600, CDTV)....
-
Amiga 27C4096 ROM Adaptor (with fix jumper for early revision Amiga)
The 27C4096 EPROM has the advantage that is can be programmed using inexpensive programmers like the...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1338 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1867 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1858 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2037 0 1 -
