|
NE555PTexas Instruments
|
x 1 | |
|
|
1K Resistor |
x 1 | |
|
|
10k Resistor |
x 1 | |
|
|
4.7uF Capacitor |
x 1 | |
|
|
10n Capacitor |
x 1 | |
|
|
8-Pin IC Socket (Optional) |
x 1 |
|
3D Printer (generic) |
|
|
Soldering iron |
Rapid Fire for Retro Joysticks.
I asked the question, is it possible to design and 3D print your own Retro joystick that would be strong enough to be usable. The simple answer is, YES!
With slightly different wiring it would also work on many other systems.
I guide you through all the steps from designing to building, and then at the end some testing!
I've provided links to everything you need to build one yourself.
For full information see the video:
Rapid Fire for Retro Joysticks.
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-NonCommercial-ShareAlike (CC BY-NC-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(9)
More by Rob Smith
-
MiSTer Floppy (SMD Version)
MiSTer Floppy is an add-on board that connects to the MiSTer USER port to provide real physical flop...
-
Rapid Fire for Retro Joysticks.
I asked the question, is it possible to design and 3D print your own Retro joystick that would be st...
-
MiSTer Floppy SMD Case
A simple case for the MiSTer Floppy SMD board. The board should tightly snap into the base, and the ...
-
MiSTer Floppy (Thru-Hole Version)
MiSTer Floppy is an add-on board that connects to the MiSTer USER port to provide real physical flop...
-
Floating Lemming
As of the 14th February, 2026, It's the 35th Anniversary of the release of the popular game Lemmings...
-
68000 CPU Relocator / Pin Breakout
A simple breakout board you can use to monitor all of the signals from a 68000 CPU without paying lo...
-
Alien Motion Tracker Secondary PCB
Over three videos I created a full qorking M314 Motion Tracker from the Aliens film. This tracker ac...
-
Alien Motion Tracker Pi PCB
Over three videos I created a full working M314 Motion Tracker from the Aliens film. This tracker ac...
-
Amiga A590 Case
New Amiga A590 Case that also holds a BlueScsi V2 in the lid.This was featured in This was featured ...
-
The h0ffinator
I'm going to tell you a story about playing a small prank on a coder and a self proclaimed greedy mu...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1331 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1856 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1844 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2019 0 1 -
