Pc soundcard scope adapter - 2 channels
1V0 and 1V9/0V0 and 0V9 are 9 volt battery conections (2 of them) ic1, ic5 and ic6 are outputs (1 reference output aprox 280 hz) and two channels. You can use a stereo jack to connect it to a USB soundcard and Voila! Now you have a buck scope!
Also with VR1 and VR2 you cans adjust the output amplitude...
SW1 & SW2 are peak voltage selectors, from 1,4 volt max to 1400 volt max
Pc soundcard scope adapter - 2 channels
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Gabe Hidalgo
-
nixie tubes power supply
A cheap 555 TIMER controlled boost converter!
-
555 timer high voltage boost converter
this SMPS can be powered with low input voltage, from 12 to 24 volt DC and provides adjustabe output...
-
Pc soundcard scope adapter - 2 channels
1V0 and 1V9/0V0 and 0V9 are 9 volt battery conections (2 of them) ic1, ic5 and ic6 are outputs (1 re...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1347 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1872 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1872 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2046 0 1 -
