|
|
U1 - LMV358 |
x 1 | |
|
|
C1 |
x 3 | |
|
|
C2 |
x 1 | |
|
|
C3 - 1uF 0603 10V |
x 1 | |
|
|
R1 - 68K 0603 |
x 1 | |
|
|
R2 - 3.3K 0603 |
x 2 | |
|
|
R3 - 1K 0603 |
x 1 | |
|
|
R4 |
x 1 | |
|
|
R8 - 10K 0603 |
x 1 |
Low power microphone pre-amp
Designed this little module to add a line out to a RF lav mic belt pack I picked up cheap on eBay.
Built with the parts list provided it has a gain factor of 51 (appx. 10mV in, 500mV out) with a noise level more than sufficient for audio applications. Runs off a single ended DC power supply from 2.7 to 5V, and can easily be adapted to other small signal amplification tasks in the audio frequency range by changing the biasing and feedback resistors.
Low power microphone pre-amp
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by kmm
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1335 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1865 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1852 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2031 0 1 -
