Liquid Level Controller
Simple device, no CPU - only simple logic. If the water level exceeds the first level, the main pump starts. If she can pump out the excess water, the pump stops. If one pump fails and the water level exceeds the water level - the next pump starts and they pump together until they reach a safe level.
All electronics powered from 230V and gives direct output via SSR relay or to terminals if you want to turn on more powerful pumps.
Liquid Level Controller
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution (CC BY) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Krzysztof Swoboda
-
Liquid Level Controller
Simple device, no CPU - only simple logic. If the water level exceeds the first level, the main pump...
-
GPRS Webasto driver on BLYNK based API & RS485 MODBUS RTU GPRS Transmitter
The device was created as an alternative to the factory TELESTART for WEBASTO. It is cheaper and rel...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1340 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1868 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1862 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2039 0 1 -
