Jam Electronic Timer (JET): Compact Edition
A version of the P8 Jam Timer (JETT) designed to have all electronics (except a single horn speaker) contained in the main enclosure.
Hardware has been simplified somewhat, but still uses the same Arduino firmware as its predecessor. The audio amplifier in the original has been replaced by a TDA3116D breakout board with minor modifications:
- Remove and short C9
- Remove and short C10
- Connect Left Input to GND (performed on the PCB)
- Replace R2 with 75K
- Replace R3 with 47K
- Remove R1
Jam Electronic Timer (JET): Compact Edition
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Voon-Li CHUNG
-
Jam Electronic Timer (JET): Compact Edition
A version of the P8 Jam Timer (JETT) designed to have all electronics (except a single horn speaker)...
-
P6: Penalty Box Main Unit
Main unit for the PET automated penalty box.
-
P6: Penalty Box NFC Reader Sub-Unit
The NFC reader unit that is placed on the armrest of the penalty box chair. For use in WFTDA-based r...
-
Jam Electronic Timer (JET) (Timing Beacon)
https://outofplayblog.wordpress.com/2022/01/24/jet-jam-electronic-timer/
-
Jam Electronic Timer (JET)
The main board for a Jam Timer replacement system for roller derby.https://outofplayblog.wordpress.c...
-
Jammer Ref Gauntlet: Belt Unit
Used by Jammer Referees, allows JRs to perform basic SK functions directly by a series of handheld b...
-
Jammer Ref Gauntlet: Hand Units with MX Switches
Jammer Referee Gauntlets - hand units using MX (eg. Cherry) switches. By Vector.https://outofplayblo...
-
Jammer Ref Gauntlet: Hand Units with Tactile Switches
The hand units for Jammer Referee Gauntlets for Roller Derby. By Vector.You will need two (one for e...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1347 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1872 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1872 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2046 0 1 -
