ICM42688 SlimeVR tracker - assembled - RareCheese
ICM-42688-「RareCheese」(With external oscillator , AUX port and DC-DC Buck power supply) -
When you place an order in PCB, remember change the PCB thickness to 1mm!
Before flashing the firmware, the board must be connected to the battery.
This design removes the protection diode (to prevent Li-po battery overcharged while uploading firmware), and USB-5V is supplied to the battery via the on-board charging chip TP4057.
The on-board charger will not output voltage without being connected to the battery.
ICM42688 SlimeVR tracker - assembled - RareCheese
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(2)
More by Neo EmberTech
-
LSM6DSV + QMC6309 Breakout board V1 for SmolSlime Trackers
A prototype LSM6DSV breakout board for smolslime trackers (stacked schematic on nRF52840 boards). No...
-
ICM42688 SlimeVR tracker - assembled - RareCheese
ICM-42688-「RareCheese」(With external oscillator , AUX port and DC-DC Buck power supply) -When you pl...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1342 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1870 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1866 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2043 0 1 -
