ESP32-Minikit Base Board
Base Board for ESP32-MiniKit
Electrolytic capacitors and ceramic capacitors for 3V3 and 5V power lines can be mounted.(C1/C2/C3/C4)
The following JST XH connectors can be mounted.
1.SPI: 3V3/GND/MISO/MOSI/SS/SCK
2.I2C: 3V3/GND/SCL/SDA
3.JTAG: 3V3/GND/TMS/TCK/TDO/TDI
4.RESET: 3V3/GND/EN
5.IO1: 3V3/GND/IO16/IO17/IO33
6.IO2: 3V3/GND/IO25/IO27/IO32
7.DS18B20: 3V3/GND/IO26(Resistor can be mounted. (R1))
8.5V: 5V/GND
ESP32-Minikit Base Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Yukari Shoji
-
ESP32 DevKit-C Base Board
ESP32-DevKit-C Base BoardConnectersJ1: JTAG (3V3/GND/TMS/TCK/TDO/TDO)J2: I2C (GND/3V3/SCL/SDA)J3: I2...
-
ESP32 CPU board for ESP-PROG. Ver2.0
This CPU board is Ver.2 for use with ESP-PROG.Since the writing circuit of ESP-PROG is used, it is a...
-
ESP32 CPU board for ESP-PROG.
This CPU board is for use with ESP-PROG.Since the writing circuit of ESP-PROG is used, it is a simpl...
-
Corsair Lighting Protocol board
This board can be used to integrate custom/unofficial ARGB strips with iCUE. software from: https://...
-
ESP32-Minikit Base Board
Base Board for ESP32-MiniKitElectrolytic capacitors and ceramic capacitors for 3V3 and 5V power line...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1362 0 5 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1887 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1889 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2064 0 1 -
