ESP32 Generic Monitor Prototyping Board
ESP32 Prototyping/Dev Board that allows various connectors to be easily wired up to any of the available GPIOs.
Specifically for the cheaper ESP32 DEVKIT-C v4 devices.
Includes one dedicated DS18b20 temperature sensor socket on-board.
Small (1.27mm) JTAG socket and JTAG PWR connector included.
Reset button included.
ESP32 can be powered via
- JTAG device (eg ESPTOOL)
- External +5V supply to socket on PCB
- USB to the ESP32 device
On socket dedicated for a DS18b20 temperature sensor. Just needs the GPIO pin connected.
ESP32 Generic Monitor Prototyping Board
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Ralph Bacon
-
ESP32 Generic Monitor Prototyping Board
ESP32 Prototyping/Dev Board that allows various connectors to be easily wired up to any of the avail...
-
Standalone Minimalist Nano DIP
If you're trying to use a bare 328P chip in your project (SMD or DIP) it can be awkward to update te...
-
PIR Deep Sleep for ATMega328P
This is a practical implementation of the ATMEL ATMega328P Deep Sleep mode, interrupted (woken up) b...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1335 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1865 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1852 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2031 0 1 -
