Blinking LEDs without programming
Blinking Two LEDs Using Transistors
The circuit for blinking an LED using transistors is called an Astable Multivibrator.
To understand this circuit you need to know how voltages and currents behave around resistors, capacitors and diodes.
Here’s an overview of what happens:
The two capacitors C1 and C2 will alternate between being charged and discharged and thereby turning the transistors ON and OFF. When a transistor is ON it allows current to flow through it so that the LED above it will light up.
If you want to dive into the details, check out How Astable Multivibrator Circuits Work.
https://www.build-electronic-circuits.com/what-is-a-diode/
Blinking LEDs without programming
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by PagAnto
-
Spectrum Monitoring
Spectrum Monitoring with open source Hardware & SoftwareThe ElectroSense network is a crowd-sour...
-
Arduino Shield
The Shield can be used with the Arduino board to build a prototype circuit.All pins and power are ro...
-
LiFi - OpenVLC
LiFi OpenVLC is an open-source, flexible and low-cost Visible Light Communication System platform. R...
-
7404 oscillator
An oscillator made with TTL ICs, in it is used a 7404, which is an IC specifically designed to perfo...
-
Blinking LEDs without programming
Blinking Two LEDs Using TransistorsThe circuit for blinking an LED using transistors is called an As...
-
ANTI STUMBLING CIRCUIT
A circuit not very different from a common metronome but unlike the musical circuit, in this case we...
-
12 V DC battery charge
This simple circuit for charging car batteries is interesting for its behavior which can be defined ...
-
Prototype of a system for self-diagnosis of electronic power converters based on the board Nucleo STM32
This project proposes a diagnostic system of a power electronic converter, based on a cheap STM32 Nu...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1352 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1878 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1877 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2052 0 1 -
