Arduino Mega Rev.3 with CH340G
Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Mega to use it as USB to serial converter chip. I changed also the USB B type connector to Micro USB - now it is more common and standard. Assembling this board requires soldering and programming experience. All needed information how to burn the bootloader inside theAtmega2560 / Atmega1280 chip, you can find in the Arduino site.
Arduino Mega Rev.3 with CH340G
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(3)
- Likes(2)
More by penev_milen
-
Desk VFD clock
The project is based on the soviet IVL2-5/7 vacuum fluorescent display and it is controlled by ESP32...
-
Simplest to build multifunctional alarm clock
Simple clock based on the SC3610D and LCD. It can be configured to work as alarm clock or radio freq...
-
All Band Radio
This PCB is the main part of all band radio based on SI4735 chip. It can be used different controlli...
-
LORADUINO USB to LORA converter
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
LORADUINO Main board
The Arduino is widely used platform for lot of applications. Despite its all advantages in some case...
-
Arduino Mega Rev.3 with CH340G
Because the CH340G chip is cheaper and easy to find I decided to modify the design of the Arduino Me...
-
Phone call detector
All needed information about the device can be found in the Instructables site : https://www.instruc...
-
White noise generator
This board can be used for white noise generation. Its principle of work is based on the noise gener...
-
Joule Thief Power Bank
All project data can be found under the following link : https://www.instructables.com/Joule-Thief-P...
-
Arduino nano to uno adaptor board
Arduino Nano is a nice, small and cheap member of the Arduino family. It is based on the Atmega328 c...
-
Shield_DMM
This miliohm meter can be very useful in some cases - it can be used during debugging of some elec...
-
FM Radio
All needed information can be found under this: http://www.instructables.com/id/Tiny-FM-radio/
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1339 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1867 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1858 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2037 0 1 -
