|
KiCADKicad
|
|
|
Raspbian OSRaspberry Pi
|
Apple2-IO-RPi v6
Purpose
The purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Raspberry Pi Zero W which is powered by the Apple II expansion bus. This includes using the attached RPi Zero W for it's storage, network and processor to provide new functionality for the Apple II.
Features
- Boot message which waits for RPi to be ready
- ProDOS bootable drive from image stored on RPi
- Linux bash shell to the RPi from the Apple II including some VT100 support via -SHELL from ProDOS
- Load binary files directly from the RPi to the II (temporarily removed from firmware but will come back as a utility or dynamic virtual drive
- Update Apple II firmware in place from image on RPi (note, this is done per slot)
- Supports two drive images at the same time
- Supports "RPI" command from BASIC to execute Linux commands from the command prompt or inside BASIC programs: 10 PRINT CHR$(4);"RPI ls -al /"
Setup
https://github.com/tjboldt/Apple2-IO-RPi/discussions/63
Sixth Revision Hardware
New hardware revision adds a jumper to select internal (Apple expansion bus) or external (USB) power.
Apple2-IO-RPi v6
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-MIT License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(15)
More by Terence Boldt
-
Apple2-IO-RPi v7
Apple2-IO-RPi v7PurposeThe purpose of this project is to provide I/O for an Apple II series 8 bit co...
-
ProDOS ROM-Drive v4
This is a peripheral card for the Apple ][ series computers that acts as a read-only solid state dis...
-
Apple2-IO-RPi v6
PurposeThe purpose of this project is to provide I/O for an Apple II series 8 bit computer via a Ras...
-
ProDOS ROM-Drive v3 -- REPLACED with v4
UPDATE: v2.1, v2.5 and v3.0 have a data bus error causing occasional read failures. This is fixed in...
-
Apple2-IO-RPi v5
Update: There is a v6 but the only difference is a jumper to select internal (Apple expansion bus) v...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1342 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1870 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1866 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2043 0 1 -
