Antithesis MK3.1 Bed Heater V0.2
Antithesis MK3.1 Bed Heater V0.1
The PCB Trace Heater for the Antithesis MK3.1 3D printer. It replaces the older CF build plate as a much cheaper and lighter alternative.
Due to manufacturing variation the resistance of some V0.1 boards was a bit too low causing higher than ideal current draw. The V0.2 reduces the trace width by .1mm bringing the average current closer to ideal values.
Specifications:
- Size: 10x13cm
- Thickness: 1.6mm
- Voltage: 24VDC
- Power 108W
- Current: 4.5A
- Resistance: 5.33Ω
- W/cm?: 0.75 to 0.825
- Max Temp: 110C
- Time to 100C: 2 Minutes 15 Seconds
- Unassembled Weight: 56g
- Assembled Weight: 190g
Antithesis MK3.1 Bed Heater V0.2
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Engineer
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1393 0 5 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1926 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1929 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2108 0 1 -
