the manual cnc machine is the cnc machine which not only work on code but also can be controlled with hands.

the main aim to build this cnc machine is to learn some printing techniques and don't be dependent on machines for all.

the working of the machine is as follows'

1. the machine consists of two arduino nano which is reponsible for each motors i.e the x axis and the y axis motor.
2. to contoll the cnc 4 joystics or a button are provided to ride the motor where necessary.
3. if you have made an cnc machine already at home which is half automated then you can give a shot to this project
4. you just need to detach the motor cables and the arduino cables and join them here on the pcb .
5. then you don't need to upload the code just nedd to upload the instructions yo both teh arduinos.

that's all and now you can make your own print or write on your wish.

that's all for the project

thanks to pcbway for continuosly motivating us and supporting us.

regards

praddy