4 wire resistor standard
The board has a 4 wire setup for measuring resistors. You can have 2 resistors in a series or 4 in a series/parallel setup.
10 kΩ + 10 kΩ = 20 kΩ
10 kΩ + 10 kΩ
= 10 kΩ
10 kΩ + 10 kΩ
10 kΩ + 5 kΩ = 15 kΩ
10 kΩ + 5 kΩ
= 7.5 kΩ
10 kΩ + 5 kΩ
If you populate with just 10 kΩ resistors, you get 10 kΩ, the advantage is you can mix the resistors to get the closest to 10 kΩ.
I have also added an option for a thermister or a 1-wire option for measuring the resistors' ambient temperature.
4 wire resistor standard
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
Dual Trailer socket for 12N & 12S sockets. Fits to 110 Land Rover Defender
The original part I have is very rusty so I made this up to replace the one I have. Its made to the ...
-
4 wire resistor standard
The board has a 4 wire setup for measuring resistors. You can have 2 resistors in a series or 4 in a...
-
4 Wire Short for Banana Leads
A basic board with a 1mm trace between the connectors.Handy if you need to short at the end of the t...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1335 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1865 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1853 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2032 0 1 -
