|
KiCad 8.0KiCad
|
8x8 LED MATRIX EDUBOARD
This board is an educational implementation of an 8x8 multiplexed led matrix. The rows/columns bits can be either addressed via I2C through an MCP23017 or directly through the headers (after unplugging the MCP).
It's designed to be an easy build, all through-hole, project for a soldering beginner, and it was designed for a friend's hw-centered coder dojo series of lessons.
You can find the repository here: https://github.com/hkzlab/8x8_Matrix_Eduboard
8x8 LED MATRIX EDUBOARD
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Attribution-ShareAlike (CC BY-SA) License
Read More⇒
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Fabio Battaglia
-
GalDisk ][
This board is yet another implementation of the Disk II controller for the Apple II line of computer...
-
SIXTEEROIDS: Commodore 16 SRAM expansion module
This board acts as a memory replacement for a Commodore 16, disabling the onboard DRAM (that can, op...
-
Flaccid Ostrich, a FloppyEmu clone
The Flaccid Ostrich is a FloppyEmu Rev.C clone I developed while redrawing the schematic of my Flopp...
-
DELTA Keyboard - DIP-16 adapter
This small adapter can be used to wire a 16-pin IDC cable from the Delta Redux keyboard to the Delta...
-
DELTA Keyboard - key switch plate
This PCB is a plate to add stability to the keys when assembling and using the DELTA Redux Keyboard,...
-
DELTA Redux ASCII keyboard
ASCII Keyboard meant to be used with the DELTA Redux Apple IIe clone computer.Ituses Cherry-MX compa...
-
DELTA Redux - RGB Video card
This is one of the two video output boards for the DELTA Redux retrocomputer.It provides analog RGB ...
-
DELTA Redux - Composite/TV Video card
This is one of the two video output boards for the DELTA Redux retrocomputer.It provides VHF output ...
-
DELTA Redux (Apple IIe clone)
The DELTA Redux is the recreation of a computer published by Nuova Elettronica in 1985. It is meant ...
-
TK2000 VDP TMS9918A board
The VDP board adds a TMS9918A Video Display Processor to the TK2000 computer, featuring colors, spri...
-
NES Flex Interconnect - Flexible Cable
The flex interconnect cable is a flexible PCB that can be used with the Slotmaster to replace the sp...
-
NES Flex Interconnect - STIFFENER
This module is the stiffener for the NES Flex interconnection cable project. It must be used togethe...
-
PlayStation PU-22 8MB RAM Daughterboard
This daughter board replaces the single main RAM IC on your PU-22 motherboard with 4 2Mx8 ICs, shuff...
-
TK2000 F.A.S.T.I.D.I.O.
The F.A.S.T.I.D.I.O. (Fully Addressable Simple Twin Interface Digital I/O) is an expansion card for ...
-
PlayStation Datel Cheat cart clone
Recreation (with a few improvements) of a clone (of a clone) of a PlayStation Datel cheat cart.This ...
-
TK2000 Disk Drive Interface
This card adds a dual floppy drive interface to the TK2000 home computer.It is compatible with the o...
-
TK2000 Bus extender
A bus extender for the TK2000 home computer, allowing up to 3 expansion cards to be installed.It is ...
-
NoCIC - Replacement NES CIC
This board uses a 555 circuit and minimal logic to implement a replacement of the CIC chip for the N...
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
1335 0 4 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
1865 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
1852 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2031 0 1 -
